一、简介
数显显微硬度计是光机一体化的高科技产品。 该硬度计造型新颖、可靠性好、可操作性强、直观性好。 它是一种新型的显微维氏和努氏硬度计。 该机采用计算机软件编程、高倍光学测量系统、光电传感器等技术,通过软键输入,可以调节测量光源的强度、选择测试方法和硬度对照表、文件编号和存储等。 ,在大液晶显示屏上显示屏可显示试验方法、试验力、测量压痕长度、硬度值、试验力保持时间、测量次数,并可输入年、月、日、试验结果及数据处理等 .,通过打印机输出,RS-232接口与电脑联网。 该硬度计适用于测量微小、薄、表面渗透涂层试样的显微硬度和玻璃、陶瓷、玛瑙、人造宝石等脆硬材料的努氏硬度。 是科研机构、企业、质检部门研究检测的理想硬度测试仪器。
二、主要技术参数
试验力 0.01kgf(0.098N), 0.025kgf(0.245N), 0.05kgf(0.49N), 0.1kgf(0.98N),
0.2kgf(1.96N)、0.3kgf(2.94N)、
0.5kgf (4.90N), 1kgf (9.80N)
硬度测试范围:8HVozs~2900HV,
试验力施加方式:自动装卸试验力
测量显微镜倍率:100×(观察)400×(测量)
测量显微镜最大范围150um
试验力停留时间:0~60s(根据需要任意输入)
每格最小检测单位:0.0311 um
试样最大高度:85mm
压头中心到外壁距离:95mm
主机重量:约25Kg
电源:AC220V/50Hz
外形尺寸:(长×宽×高)(405×290×480)mm
英斯特力仪器是一家集研发、生产及销售于一体的 影像测量仪,拉力试验机, 硬度计 ,探伤仪, 粗糙度仪, 测厚仪, 金相设备厂家, 致力于为客户提供更好的检测仪器。
A list,
Digital micro hardness tester is a high-tech product of optical and mechanical integration. The hardness tester is novel in shape, reliable, operable and intuitive. It is a new micro vickers and Knoop hardness tester. This machine uses computer software programming, high power optical measurement system, photoelectric sensor and other technology, through the soft key input, can adjust the intensity of the measurement light source, select the test method and hardness comparison table, file number and storage. , in the large LCD display screen can display test method, test force, measurement indentation length, hardness value, test force hold time, measurement times, and can input year, month, day, test results and data processing, etc., through the printer output, RS-232 interface and computer network. The hardness tester is suitable for measuring microhardness of small, thin, surface permeable coating samples and Knou hardness of brittle hard materials such as glass, ceramics, agate and artificial gems. It is an ideal hardness testing instrument for research institutions, enterprises and quality inspection departments.
Two, main technical parameters
Test force 0.01kgf(0.098N), 0.025kGF (0.245N), 0.05kGF (0.49n), 0.1kgf(0.98N),
0.3 KGF 0.2 KGF (1.96 N), (2.94 N),
0.5 KGF (4.90 N), 1 KGF (9.80 N)
Hardness test range: 8HVozs~2900HV,
Test force application mode: automatic loading and unloading test force
Measuring microscope magnification: 100× (observation) 400× (measurement)
The measuring microscope has a maximum range of 150um
Residence time of test force: 0~60s (input as required)
Minimum detection unit per cell: 0.0311um
Maximum height of sample: 85mm
Distance from center of indenter to outer wall: 95mm
Main weight: about 25Kg
Power supply: AC220V / 50 hz
Dimensions :(length × width × height) (405×290×480) mm