您好,欢迎访问英斯特力(重庆)仪器有限公司官网!
客服电话:
18702308662
技术文档
您的位置: 首页 > 技术资料 > 技术文档
.
联系我们

英斯特力仪器(重庆)

地址:重庆市北碚区蔡家岗
手机:18702308662

咨询热线18375985662

影像测量仪是什么?

发布时间:2022-03-30 16:02:49人气:

    影像测量仪又称精密影像测绘仪,它克服了传统投影仪的不足,是一种集光学、机械、电气、计算机影像技术于一体的新型高精度、高科技测量仪器。被测物体的高倍光学放大成像是通过光学显微镜进行的。放大的物体图像通过CCD摄像系统发送到计算机后,可以高效地检测各种复杂工件的轮廓和表面形状、尺寸、角度和位置。组件的显微镜检查和质量控制。测量数据可以直接输入AUTOCAD成为完整的工程图,图形可以生成DXF文件,也可以输入WORD和EXCEL进行统计分析,可以绘制简单的Xbar-S控制图得到Ca,和其他参数。

    影像测量仪工作准则:

    影像测量仪使用自带的硬件CCD、目镜、物镜数据线)将采集到的图像通过数据线传输到电脑的数据采集卡上,再用软件在电脑显示器上成像,操作员使用鼠标。在计算机上进行快速测量。上述过程基本在几万秒内完成,所以可以写成实时检测设备,也可以称为狭义的动态测量设备。如果根据需要进行配置,设备将永远不会出现图像延迟。根据工件的大小,工作台可以选择不同的行程。光源亮度可调,可在各种光照条件下选择最合适的光源亮度。

    影像测量仪用途:

    该仪器适用于所有以二坐标测量为目的的应用领域,广泛应用于机械、电子、仪器仪表、五金、塑料等行业。(模具、螺丝、金属、配件、橡胶、PCB板、弹簧、五金、电子、塑料)。

  影像测量仪自身优势:

  1.配备2个可调光源系统,不仅可以观察工件的轮廓,还可以测量不透明工件的表面形状。

  2.采用冷光源系统,可避免因受热易变形的工件变形造成的误差。

  3.工件可随意放置。

  4.仪器操作容易掌握。

  5.测量方便,只需鼠标操作。

  6.在Z轴方向添加探头传感器后,可以进行2.5D测量。


   Image measuring instrument also known as precision image mapping instrument, it overcomes the shortcomings of traditional projector, is a set of optical, mechanical, electrical, computer image technology in one of the new high precision, high-tech measuring instrument. The high power optical magnification imaging of the measured object is performed by means of an optical microscope. After the enlarged object image is sent to the computer by CCD camera system, the contour and surface shape, size, Angle and position of various complex workpiece can be efficiently detected. Microscopical examination and quality control of components. The measured data can be directly input into AUTOCAD to become a complete engineering drawing, which can generate DXF files, and can also be input into WORD and EXCEL for statistical analysis. Simple XBAR-S control chart can be drawn to obtain Ca and other parameters.


Operating criteria of image measuring instrument:

The image measuring instrument uses its own hardware CCD, eyepiece, objective data line) to transmit the collected image to the data acquisition card of the computer through the data line, and then use software to image on the computer monitor, and the operator uses the mouse. Make quick measurements on the computer. The above process is basically completed within tens of thousands of seconds, so it can be written as real-time detection equipment, or can be called a narrow sense of dynamic measurement equipment. If configured as required, the device will never experience image latency. According to the size of the workpiece, the table can choose different travel. The brightness of the light source is adjustable, and the most suitable brightness of the light source can be selected under various lighting conditions.


Application of image measuring instrument:

The instrument is suitable for all applications for the purpose of two coordinate measurement, widely used in machinery, electronics, instrumentation, hardware, plastic and other industries. (Mold, screw, metal, accessories, rubber, PCB board, spring, hardware, electronics, plastic).


Image measuring instrument own advantages:

1.Equipped with 2 adjustable light source systems, not only can observe the contour of the workpiece, but also can measure the surface shape of the opaque workpiece.

2. The cold light source system can avoid the errors caused by the deformation of the workpiece easily deformed by heat.

3. Workpiece can be placed at will.

4. Instrument operation is easy to master.

5. Convenient measurement, only need mouse operation.

6. After adding probe sensor in z-axis direction, 2.5D measurement can be carried out.




推荐资讯

在线客服
联系方式

热线电话一

18702308662

热线电话二

18375985662

上班时间

周一到周五

二维码
线