一、准备:
1、检查投影位开关是否处于关断位置;
2、检查开关电源、投影仪电路是否处于接通状态;
二、操作:
1、启动机台总电源;
2、开启计算机;
3、开启投影仪操作软件:
4、将待测产品放到测量夹身上，然后将夹具轻放到投影仪操作平台上，靠在固定夹具上
5、依据产品的尺寸及规格，进行投影、投影结束后可以在CAD软件进行测量，最后记
录相关的数据并进行下一轮测量。
三、
1、关闭操作软件程序（先将必要的档案存盘）
2、关闭计算机;
3、关闭机台;
4、若无后续测试,盖上防尘罩。
(二)、 注意事项
1、出于安全和对测量的精度影响，请勿直接接触机器内部器件以及表面光源中间部分的镜头;
2、定期擦拭载物台及周围部分，避免灰尘进入机台内部以致影响机台精度;
3、本仪器为高精度仪器，非专业人员严禁操作;
4、切勿在载物台上摆放超过承重的对象，以免损坏机台;
5、在日常操作过程中应注意防止载物台面的划伤;
6、请勿在计算机上擅自安装或卸载软件，以免导致系统崩溃或操作软件无法正常运行;
7、定期对仪器加润滑油以保持仪器的精度;
8、严禁人手扶或靠在机台上，以免机台失去精度。
英斯特力仪器是一家集研发、生产及销售于一体的 影像测量仪，拉力试验机, 硬度计 ,探伤仪, 粗糙度仪, 测厚仪, 金相设备厂家, 致力于为客户提供更好的检测仪器。
I. Preparation:
1. Check whether the projection switch is in the off position;
2. Check whether the switching power supply and projector circuit are switched on;
Two, operation:
1. Start the total power supply of the machine;
2. Turn on the computer;
3. Open the projector operating software:
4, put the product to be tested on the measuring clamp, and then put the fixture lightly on the projector operating platform, leaning on the fixed fixture
5, according to the size and specifications of the product, projection, after the end of the projection can be measured in CAD software, and finally recorded
Record the relevant data and conduct the next round of measurement.
Three,
1. Close the operating software program (save the necessary files first)
2. Turn off the computer;
3. Close the machine;
4, if there is no follow-up test, cover the dust cover.
(2) Matters needing attention
1. For the sake of safety and the impact on the measurement accuracy, do not directly contact the lens of the internal components of the machine and the middle part of the surface light source;
2. Wipe the loading platform and the surrounding parts regularly to avoid dust entering the machine so as to affect the accuracy of the machine;
3, the instrument is a high-precision instrument, non-professionals are strictly prohibited to operate;
4. Do not place more than load-bearing objects on the loading platform, so as not to damage the machine;
5, in the daily operation process should pay attention to prevent scratches on the loading table;
6. Do not install or uninstall software on the computer without authorization, otherwise the system will crash or the operating software cannot run normally;
7, regularly add lubricating oil to the instrument to maintain the accuracy of the instrument;
8. It is strictly forbidden to hold or lean on the machine so as not to lose accuracy.
客服1 